Replacement Remote Control Transmitters (390MHz frequency) for all Genie Intellicode and Overhead Door CodeDodger garage door opener brands and models manufactured in or after 1998 ONLY.*  The GITR-3 remote is the ONLY remote that will work with Genie Intellicode garage door openers made between 1995 and 1998.  And ONLY the right button will work.  Date code is found on a small white sticker on the main power head of the garage door opener.

Garage Door Openers Remote Control Instructions click here.

Genie Remote Control Programming G3T-BX

Genie Garage Door Openers made prior to 1995 that have either a 9 or 12 dip switch

Replacement Remote Control Transmitters (390MHz frequency ONLY) for all Genie garage door opener brands and models made prior to 1995 that have either a 9 or 12 dip switch (small block of tiny switches or punch out wires) coding format.  The dip switch format is found inside your existing remotes battery compartment or inside your “receiver”.  The receiver is either attached separately to the main power head of your garage door opener or is built into the main power head.  The receiver has a short antenna wire hanging from it.  All Genie 12 switch coding formats may use any of the remotes in this category.  All Genie 9 switch formats use a receiver that was attached separately from the main power head and MUST be in the 390 MHz frequency (frequency number is found on the end cap of the receiver box).  All other frequencies (290, 295, 300, etc..) made by Genie are obsolete. Please contact us if you need help matching the correct replacement remote control.

NO LONGER AVAILABLE USE GT912 or 375LM ABOVE

Replacement remote control transmitters are compatible with Genie garage door opener models that use the 9 or 12 dip switch coding format and operate in the 390MHz frequency ONLY.

375LM includes battery (CR2032), visor clip and instructions.

Homelink compatible.

Compatible Keyless Entry – GPWK.

 Genie Garage Door Openers Dual Frequency (390/315 MHz)

Genie garage door opener Dual Frequency (390/315 MHz) replacement remote controls.  For a brief period of time Genie manufactured some models of garage door openers that used a dual frequency receiver and remote.  That was approximately between the Fall of 2005 and the Spring of 2007.  Those models of garage door openers are no longer in production.  Below are the replacement dual frequency remote controls. Genie does currently offer a dual frequency Radio Receiver Kit - GIRUDT-1.  It includes a dual frequency remote and is used to update or replace receivers on any brand or model of garage door opener.  Click here for more information on the GIRUD Receiver Kits.

Replacement dual frequency remotes controls are compatible with any Genie Intellicode or Overhead Door garage door opener brands and models that were made in or after 1998, and are operated in the 390MHz format.  Or, as a replacement for those that are using the 315MHz frequency.

GICTD-1 and GICTD-3 include battery (CR2032), visor clip (108389), docking station (35612A), and instructions.  These remotes are also key ring compatible.  No key chain included.

GIFTD-1 includes battery (AAA), key ring, and instructions.

Homelink compatible.

Compatible Keyless Entry – GWKIC.  Only in the 390MHz format.  Genie currently does not offer a keyless entry for the 315MHz format.

Compatible Garage Door Opener Keyless Entry is not yet available.

Garage Door Openers Remote Control Instructions click here.

Genie Gated Communities Remote Control and Receiver

Replacement Genie garage door opener 3 button gated remote control transmitter GCT-3.  Gate button is compatible with Genie Gated Communities Receiver model 34564R.  Shown below.  Buttons 2 and 3 are compatible with Genie Intellicode and Overhead Door CodeDodger garage door opener brands and models.

GCT-3 Remote includes battery (9 Volt), visor clip (27576A), and instructions.

Homelink compatible.

Genie  Receiver model 34564R for Gated Communities

34564R

$55.75

Genie Single Channel Gate Receiver.

Operates 1 Gate.

390 MHZ Frequency.

Equipped with 9 Trinary,(0,+,-), Coding Switches.

Works with Dual Code Remote Control model GCT-3.

Garage Door Remote Control Accessories